MaxiFlex Extra Long White 6x12mm IP67 48V 10cm cut 40m
MaxiFlex Extra Long White 6x12mm IP67 48V 10cm cut 40m
Available in stock (25)
MaxiFlex Extra Long 48V — the trade-grade specification. When the install crosses 20 metres in a single sweep, 24V hits voltage drop limits and you need parallel feeds. 48V solves that with one feed. It can do a 40 metre continuous run from one-side power, with no visible voltage drop. Built for commercial outdoor, large-residential perimeters, and any landscape install where simple single-feed wiring matters more than incremental cut precision.
10cm (100mm) cut intervals. 6x12mm IP67 silicone — same construction quality as the rest of the MaxiFlex range, only the voltage and cut interval scale with the use case. 9W per metre, 120 LEDs per metre, 690 lumens per metre, CRI above 80. Designed for permanent UK outdoor installation across the full -30°C to +50°C operating envelope.
Trade applications where 48V wins
Long driveway perimeters: a long-rural driveway from gate to property may run 30-40m one-way. 48V handles it from a single power point. 24V would need a mid-run driver buried in a junction box — extra labour, extra failure surface.
Estate boundary lighting: high-end residential estates with 40-50m perimeter walls. Two 48V reels with a corner crossover handles the full perimeter — clean single light line, minimal driver count.
Hospitality and commercial outdoor: restaurant terrace surrounds, hotel poolside framing, retail forecourt perimeters. Trade specifications generally favour 48V for its single-feed simplicity and reduced point-of-failure count.
Architectural facade lines: long horizontal architectural detail on commercial buildings — fascia accents, soffit underlining, security-perimeter wall washes. 40m reels reduce visible joins.
The 48V specification advantage
Voltage drop is proportional to the square of current at fixed power. Doubling voltage from 24V to 48V halves the current at the same wattage, so resistive losses drop by a factor of four. That's why a 24V system maxes at ~20m and 48V doubles to ~40m on the same conductor.
The trade-off: at 48V the LEDs are wired in series-of-two on the PCB, so cut points come every 10cm rather than every 5cm or 1cm. This is fine for landscape and commercial work where the run is long and the cut precision matters less than the single-feed distance.
Install detail for 48V trade installs
Driver sizing for 40m: 40 × 9W = 360W draw. With the 1.2 safety multiplier you need 432W — round up to 480W or 500W 48V driver. Mean Well HEP-480-48 fits this exactly with appropriate IP-rated housing for outdoor mounting.
Cut points: every 10cm (100mm). The series-of-two LED arrangement at 48V means each cut point releases a pair of LEDs. Cut only on marks — between marks shorts the pair and voids the IP67 end-cap seal.
Bend radius: 15mm horizontal minimum, horizontal-bend only. Same physical profile as the 24V range — fully compatible with our 6x12mm aluminium landscape channels.
BS7671 and SELV: 48V DC sits within Separated Extra Low Voltage thresholds (BS7671 18th Edition) when supplied from a properly isolated low-voltage driver. Install by qualified competent person — never bypass the driver to mains.
Cable run sizing: for 48V driver-to-strip cable runs over 5m, use 1.5mm² minimum to keep voltage drop on the supply leg negligible.
For UK country homes and larger residential estates
Detached homes with substantial gardens, country residences, and rural properties where the install spans 25-40m or more. 48V removes the parallel-feed complexity at this scale:
Country garden boundaries: rural property fence-lines, traditional hedge-line borders, and stone-wall perimeters on detached country homes — typical 30-40m runs from a single corner driver.
Long driveway-to-garden continuous runs: properties where the lighting starts at the gate, follows the driveway, wraps round the house, and continues into the rear patio — all on one unbroken light line.
Estate-style perimeter lighting: full-perimeter lighting on substantial detached homes, gated properties, and homes with formal front-and-rear garden schemes.
Larger residential entertaining zones: homes with wedding-licence gardens, marquee zones, and substantial outdoor entertainment areas where one continuous 40m run replaces several short ones.
Colour selection for trade outdoor specs
2700K — deep amber. Hospitality, restaurant, evening trade outdoor.
3000K — warm white. Default residential and standard commercial.
4000K — neutral. Modern commercial, contemporary residential, security-trim accent.
6000K — daylight cool. Commercial, security perimeters, premises with colour-accurate rendering requirements.
Need a shorter run or finer cut?
MaxiFlex 24V — 1cm cut, 15m: precision-cut format for fine landscape detail and driveway corners.
MaxiFlex Extra Long 24V — 5cm cut, 20m: standard mid-range — typical residential driveways and garden perimeters.
Custom-cut to your specification, IP67-resealed at our facility, UK-wide trade dispatch.
Specifications
- Voltage: 48V DC
- Power: 9W per metre
- LED config: 120 LEDs/m (2835 SMD), wired series-of-two
- Output: ~690 lumens/m
- CRI: >80
- Beam: 120°
- Profile: 6mm × 12mm
- Cut interval: 100mm (10cm)
- Bend radius: 15mm minimum, horizontal plane
- Continuous run: 40m one-feed / 60m dual-end
- Colour temperatures: 2700K, 3000K, 4000K, 6000K
- Operating range: -30°C to +50°C
- Rated life: 50,000 hours
- IP rating: IP67 (permanent outdoor)
- Material: UV-stable silicone
- Mounting: 6x12mm aluminium landscape profile + clip
- Compliance: UKCA, CE, RoHS
- Trade warranty: 4 years
4-year warranty. Free UK delivery on Mainland orders (2-3 working days). Trade accounts available. Designed in the UK.
Specifications
Specifications
| Brand | |
|---|---|
| Product Type | |
| Colour | Multiple — 2700K, 3000K, 4000K, 6000K |
| IP Rating | |
| LED's Per Metre | 120 |
| Continuous Run | 40m |
| Voltage | 48V |
| Watts Per Metre | 9 Watts |
| Metres | 50m roll |
| Dimensions | 6x12mm |
| Width | 6mm |
| Depth | 12mm |
| Bending Angle | |
| Lumens Per Metre | 590 lm |
| Cut Points | 10cm (100mm) |
| Operating Temperature | -30°C to 50°C |
| LED Type | 2835 |
| Average LED Life Hours | 50,000 |
| Continuous Operating Hours | 15 hours |
| Max Bending | 1.5cm |
| Shape | Flat |
| Certification | UKCA, CE, RoHS |
| Material | Silicone |
| Guarantee | 4 Years |
| Attachment | Clips or Profile |
| CRI | >90 |
Shipping & Returns
Shipping & Returns
Shipping Policy
Free UK Delivery
We offer free standard UK delivery on over 95% of our products. Standard free-shipping parcels are sent via Royal Mail 48-hour tracked delivery.
Next Day Delivery
Next Day Delivery orders are sent via DPD, with full tracking details provided.
The exception — 1-metre rigid profiles
A small range of approximately 21 products — our 1-metre rigid aluminium and PVC profiles — carries a delivery charge. These items are too long for our standard free-shipping service: Royal Mail cannot accept a parcel longer than 45 cm, and a 1-metre profile far exceeds that limit.
Because of their length these profiles are shipped by DPD courier, not Evri. We moved this range to DPD after Evri’s parcel loss rate and damage rate on long items became unacceptably high — DPD gives these orders the protection and tracking they need to arrive intact.
For these 1-metre profiles, delivery is charged at checkout:
- £6.95 — 1 to 2 working days (DPD), on orders under £90
- FREE next-day delivery when your order total is £90 or more
- Timed and Saturday upgrades are available at checkout
All other orders continue to qualify for our standard free Royal Mail 48-hour delivery.
Order cut-off & delivery times
- Order cut-off is 1pm, Monday to Friday. Orders placed before 1pm dispatch the same working day; after 1pm, the next working day.
- Next Day Delivery means the next working day — it excludes weekends, bank and public holidays. An order before 1pm Friday is delivered Monday; after 1pm Friday it dispatches Monday for Tuesday delivery.
- For a Saturday arrival, select “Saturday Delivery” at checkout — standard Next Day Delivery does not deliver on Saturdays.
- We cannot dispatch on bank holidays; orders go out on the next working day.
- Large order? Please call 01952 370028 before ordering so we can confirm whether it can be dispatched same-day or next-day.
For full details see our Shipping Policy.
Return Policy
We offer a 15 day, no-quibble returns or replacement policy, because we want you to be totally satisfied with your purchase. If you’re unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 15 days of receiving it.
We will pay for your return postage on a faulty item as long as you send it using Hermes or Royal Mail 2nd class recorded delivery and within 15 days of receiving it.
All products available in variable lengths are cut and customized from 30-metre or 50-metre rolls according to your specific requirements. Only a limited number of items are pre-made. Since our made-to-measure items, such as LED Strip Lights, Silicone Profiles, Bendable Profiles or Neon Flex Lights, are customized specifically for you, they cannot be cancelled or returned. Please ensure your order details are correct before placing it, as these items are considered special orders and are non-refundable once processed. However, if you purchase a full 50-metre roll, you may return it for a full refund, provided it is unused, in its original condition, and in the original packaging. Certain items are excluded from our returns and refund policy, including goods that are made to measure, cut, or mixed according to your requirements. Orders with different cutting lengths, or any order over £50 in value, are classified as custom and therefore do not qualify for a refund or return if there is no fault with the product. These orders require significant time and effort to prepare. All the unused accessories such as power supplies, power adapters, controllers, drivers and profiles are returnable.
Any type of modification to the lights will invalidate the warranty. Once the lights have been modified no replacement or refunds will be issued, specially the AC 220V 240V led strip and neon flex lights which come with an attached UK Plug (Hardwiring 220V 240V lights will void the warranty).
If you want to hardwire the lights then please check the DC 12V, 24V and 48V which are designed to be hardwired using a power supply. If the item becomes faulty within the warranty period (12 Months) then we will issue you a replacement. Please note that we will only be able to send you a replacement, no refunds will be issued. We are not responsible for any fitting and fixture costs.
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
With our technical expertise and relentless attention to detail, we ensure our customers deliver their projects to the highest standards.
We handle everything—from sourcing and customization to manufacturing and delivery—so your products arrive job-ready and ready for immediate installation.
Share your project details with us, and our team will assess your requirements to recommend the most effective and tailored solutions for your needs.
Every light we create is custom-cut and tailored to your exact design specifications—delivering a truly bespoke lighting solution that fits your project perfectly.
Whether you're creating atmosphere, enhancing architecture, or elevating your brand, our precision-prepared lighting lets you enjoy the perfect ambience from the moment it's installed.