Cool White Neon Flex 6000K 48V 10x10mm Top Bend IP67 Waterproof 25m
Cool White Neon Flex 6000K 48V 10x10mm Top Bend IP67 Waterproof 25m
Available in stock (25)
10x10mm Vertical Bend Neon Flex — also sold as Top Bend neon flex — bends in the vertical plane only: up and over arches, along stair nosings, and up the rising strokes of signage. 48V DC, 144 LEDs per metre, IP67, cut every 8.33cm (83.3mm). It does not bend side to side.
Vertical bend (top bend) neon flex bends on its narrow edge, so the run climbs and falls with the surface instead of curving left or right. On 48V it carries up to 25m continuous from a single feed (one side power), or up to 50m continuous with power injected at both ends (dual feed) — close to double the reach of the 24V 10x10mm dual-bend equivalent. Built from anti-yellowing UV-stable silicone, it holds up to UK weather year-round and a 120° beam delivers smooth, shadow-free light with no hot spots.
What is vertical bend (top bend) neon flex?
Vertical bend neon flex, also called top bend neon flex, is LED neon flex that flexes on its short axis — it curves up and down rather than side to side. It suits arches, stair edges, vertical signage strokes, and any run that follows a rising or falling line. For left-right curves you need side bend or dual bend instead.
Where does top bend neon flex fit best?
- Arches and curved-top features: vertical bend flex follows the rise and fall of arched openings, domed coving, and barrel detail that side-bend flex cannot track.
- Stair nosings and stepped runs: the top bend hugs each riser and tread edge on staircases and tiered seating.
- Vertical signage strokes: the climbing strokes of channel letters and bespoke neon signage where the flex must turn up the face.
- Long fascia and soffit lines: 48V carries the vertical bend run up to 25m on a single feed, or up to 50m with dual feed, for facade, eaves, and ceiling-perimeter detail.
Install notes
- Power feed: up to 25m continuous run from one side (single feed) on 48V, or up to 50m continuous with power injected at both ends (dual feed). Split into separate runs only where the layout exceeds 50m.
- Driver sizing: total wattage × 1.2 safety margin. A 25m vertical bend run at 11W/m draws 275W, so use a 48V driver rated at least 330W; a 50m dual-feed run draws 550W.
- Bend radius: 3cm (30mm) minimum in the vertical plane. Tighter curves risk cracking the LEDs inside the silicone body.
- Cut points: cut only at the marked 8.33cm (83.3mm) intervals — cutting between marks damages the circuit. If you cut the flex yourself, we cannot guarantee the IP67 rating unless the cut end is resealed by ATOM LED.
- Profile recommended: our neon flex aluminium profiles improve heat dissipation, protect the silicone, and give a clean finish on straight runs.
- Standard: should be installed by a competent person in accordance with BS7671.
Spec note: on 48V this vertical bend neon flex runs 25m from a single feed and up to 50m with dual feed — close to twice the 12m single-feed reach of the 24V 10x10mm dual-bend version — while the cut interval doubles from 4.17cm to 8.33cm for fewer joins on long runs.
Choose a different colour temperature
- 2700K warm white vertical bend neon flex — deep amber-warm tone, ideal for hospitality, bedrooms, and cosy ambient runs.
- 3000K warm white vertical bend neon flex — soft warm white, ideal for living spaces, retail, and architectural detail.
- 4000K natural white vertical bend neon flex — neutral balanced white, ideal for kitchens, workshops, and retail feature runs.
Need a different bend?
- 10x10mm Dual Bend 24V 6000K neon flex: bends in both planes — horizontal and vertical — for wraparound and complex layouts. Up to 12m single feed on 24V.
Every order is custom cut to your exact length — no off-the-shelf sizes, no waste. Tell us the length you need and we will cut, seal, and ship it ready for installation.
Specifications
- Bend type: vertical bend (top bend) — vertical plane only
- Voltage: 48V DC
- Max power: 11W per metre
- LED density: 144 LEDs per metre
- Lumens: up to 550 lm per metre
- CRI: >85 (colour-accurate rendering)
- Beam angle: 120°
- Dimensions: 10mm × 10mm
- Cut points: every 8.33cm (83.3mm) — do not cut between marked points
- Minimum bend radius: 3cm (30mm), vertical plane
- Continuous run: up to 25m single feed (one side power); up to 50m dual feed (power both ends)
- Colour temperature: 6000K cool white
- IP rating: IP67 — rated for indoor and outdoor use
- Material: anti-yellowing UV-stable silicone
- Certification: CE, RoHS, UKCA, ETL
- Warranty: 4 years
Frequently asked questions
Is top bend the same as vertical bend neon flex?
Yes. Top bend and vertical bend describe the same flex — it bends on its short axis, up and down, not side to side.
How far will 48V vertical bend neon flex run?
Up to 25m continuous from a single feed (one side power) on 48V, or up to 50m continuous with power injected at both ends (dual feed). Split the run only beyond 50m.
Can vertical bend neon flex bend left and right?
No. Top bend flex only bends vertically. For horizontal curves choose side bend; for both planes choose dual bend.
What is the cut interval on 10x10mm top bend neon flex?
Every 8.33cm (83.3mm). Cut only on the marked points — cutting between them breaks the circuit.
4-year warranty. Free UK delivery on all Mainland UK orders (2-3 working days). Designed in the UK.
The lights are custom cut as per your specific requirements.
Specifications
Specifications
| Brand | |
|---|---|
| Product Type | |
| Colour | Cool White 6000K |
| IP Rating | |
| LED's Per Metre | 144 |
| Continuous Run | 25m |
| Voltage | 48V |
| Watts Per Metre | 11 W/m |
| Metres | 25m |
| Dimensions | 10x10mm |
| Width | 10mm |
| Depth | 10mm |
| Bending Angle | |
| Lumens Per Metre | 550 lm |
| Cut Points | 8.33cm (83.3mm) |
| Operating Temperature | -30°C to 50°C |
| LED Type | 2835 |
| Average LED Life Hours | 50,000 |
| Continuous Operating Hours | 12 hours |
| Max Bending | 3cm |
| Shape | Flat |
| Certification | CE, RoHS, UKCA, ETL |
| Material | Silicone |
| Guarantee | 4 years |
| Attachment | Clips & Profile |
| Beam Angle | 120 |
| CRI | >85 |
Shipping & Returns
Shipping & Returns
Shipping Policy
Free UK Delivery
We offer free standard UK delivery on over 95% of our products. Standard free-shipping parcels are sent via Royal Mail 48-hour tracked delivery.
Next Day Delivery
Next Day Delivery orders are sent via DPD, with full tracking details provided.
The exception — 1-metre rigid profiles
A small range of approximately 21 products — our 1-metre rigid aluminium and PVC profiles — carries a delivery charge. These items are too long for our standard free-shipping service: Royal Mail cannot accept a parcel longer than 45 cm, and a 1-metre profile far exceeds that limit.
Because of their length these profiles are shipped by DPD courier, not Evri. We moved this range to DPD after Evri’s parcel loss rate and damage rate on long items became unacceptably high — DPD gives these orders the protection and tracking they need to arrive intact.
For these 1-metre profiles, delivery is charged at checkout:
- £6.95 — 1 to 2 working days (DPD), on orders under £90
- FREE next-day delivery when your order total is £90 or more
- Timed and Saturday upgrades are available at checkout
All other orders continue to qualify for our standard free Royal Mail 48-hour delivery.
Order cut-off & delivery times
- Order cut-off is 1pm, Monday to Friday. Orders placed before 1pm dispatch the same working day; after 1pm, the next working day.
- Next Day Delivery means the next working day — it excludes weekends, bank and public holidays. An order before 1pm Friday is delivered Monday; after 1pm Friday it dispatches Monday for Tuesday delivery.
- For a Saturday arrival, select “Saturday Delivery” at checkout — standard Next Day Delivery does not deliver on Saturdays.
- We cannot dispatch on bank holidays; orders go out on the next working day.
- Large order? Please call 01952 370028 before ordering so we can confirm whether it can be dispatched same-day or next-day.
For full details see our Shipping Policy.
Return Policy
We offer a 15 day, no-quibble returns or replacement policy, because we want you to be totally satisfied with your purchase. If you’re unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 15 days of receiving it.
We will pay for your return postage on a faulty item as long as you send it using Hermes or Royal Mail 2nd class recorded delivery and within 15 days of receiving it.
All products available in variable lengths are cut and customized from 30-metre or 50-metre rolls according to your specific requirements. Only a limited number of items are pre-made. Since our made-to-measure items, such as LED Strip Lights, Silicone Profiles, Bendable Profiles or Neon Flex Lights, are customized specifically for you, they cannot be cancelled or returned. Please ensure your order details are correct before placing it, as these items are considered special orders and are non-refundable once processed. However, if you purchase a full 50-metre roll, you may return it for a full refund, provided it is unused, in its original condition, and in the original packaging. Certain items are excluded from our returns and refund policy, including goods that are made to measure, cut, or mixed according to your requirements. Orders with different cutting lengths, or any order over £50 in value, are classified as custom and therefore do not qualify for a refund or return if there is no fault with the product. These orders require significant time and effort to prepare. All the unused accessories such as power supplies, power adapters, controllers, drivers and profiles are returnable.
Any type of modification to the lights will invalidate the warranty. Once the lights have been modified no replacement or refunds will be issued, specially the AC 220V 240V led strip and neon flex lights which come with an attached UK Plug (Hardwiring 220V 240V lights will void the warranty).
If you want to hardwire the lights then please check the DC 12V, 24V and 48V which are designed to be hardwired using a power supply. If the item becomes faulty within the warranty period (12 Months) then we will issue you a replacement. Please note that we will only be able to send you a replacement, no refunds will be issued. We are not responsible for any fitting and fixture costs.
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
With our technical expertise and relentless attention to detail, we ensure our customers deliver their projects to the highest standards.
We handle everything—from sourcing and customization to manufacturing and delivery—so your products arrive job-ready and ready for immediate installation.
Share your project details with us, and our team will assess your requirements to recommend the most effective and tailored solutions for your needs.
Every light we create is custom-cut and tailored to your exact design specifications—delivering a truly bespoke lighting solution that fits your project perfectly.
Whether you're creating atmosphere, enhancing architecture, or elevating your brand, our precision-prepared lighting lets you enjoy the perfect ambience from the moment it's installed.