Decking LED Lights White 6x12mm IP67 48V 10cm cut 40m
Decking LED Lights White 6x12mm IP67 48V 10cm cut 40m
Available in stock (30)
The 48V long-run answer. When your decking project crosses 20 metres in a single sweep, 24V hits voltage-drop limits and you need parallel feeds. 48V solves that — half the voltage drop at the same wattage, twice the safe single-feed distance. Run the entire perimeter of a large deck or full-house garden boundary from one driver location.
40 metres of single-feed continuous run — 60 metres with dual-end power. Cut at every 10cm (100mm) mark. 6x12mm IP67 silicone. 9W per metre, 120 LEDs per metre, 690 lumens per metre. Built for permanent UK outdoor exposure with the same materials and warranty as the 24V range — only the voltage doubles.
When 48V earns its place over 24V
Deck perimeters past 20m: a 6m × 8m deck = 28m perimeter. A 24V product would need two parallel feeds to cover it. 48V handles it on a single feed with a single corner driver.
Garden boundary lighting: typical UK detached/semi-detached gardens have 25-40m of fence-line or hedge-line border. 48V covers it in one piece.
Driveways combined with decking: if the same install runs from driveway edge through to deck step, 48V keeps it as one unbroken light line — no driver mid-run, no visible cable junction.
Commercial outdoor: hospitality decks, restaurant terraces, retail forecourts. Trade installs typically need single-feed simplicity and the 48V format meets specification more cleanly than parallel 24V feeds.
The voltage drop maths
At 24V, voltage drop reaches 10% (the practical limit) at around 20m for 9W/m strips. Beyond that you need a second feed from the opposite end. At 48V the same wattage runs at half the current, so resistive losses fall by a factor of four — the practical limit doubles to 40m on a single feed.
This is why 48V costs slightly more per metre — the LED chips are wired in series of two for 48V tolerance, the driver class is broader, and the cabling can run thinner for the same current carrying.
Install notes for 48V
Driver sizing for a 40m run: 40 × 9W = 360W. With the 1.2 multiplier you need 432W — round up to 480W or 500W 48V driver. Mean Well HEP-480-48 fits this exactly.
10cm cut points: the bigger interval reflects the LED chip series-of-two arrangement at 48V. Each cut point releases two LEDs, not one. Cut only at marks. End-caps must be IP67-resealed by us if cut yourself.
Bend radius and profile: 15mm minimum, horizontal only. Same 6x12mm aluminium channels as the 24V range — fully compatible.
Compliance and safety: 48V DC sits within BS7671 SELV thresholds when supplied from a properly isolated low-voltage driver. Install per 18th Edition by a competent person. Never wire to mains direct.
For larger UK homes and mature gardens
Detached properties with substantial outdoor spaces — wraparound patios, mature L-shaped gardens, and country homes — benefit from 48V's single-feed range. Where 24V hits its 20m limit and forces parallel feeds, the 40m run keeps the install simple:
Wraparound patios on detached houses: L-shaped and U-shaped patios on detached homes typically run 28-40m round the perimeter. One 40m reel handles it in one continuous, unbroken light line.
Country garden boundaries: rural and semi-rural properties with long rear-fence or hedge-line runs. 48V drives these from the house corner to the back of the plot from a single feed.
Mature, established gardens: heritage gardens, walled gardens, and Victorian-style plots with extensive perimeter borders, pathways, and feature surrounds.
Pool, pond, and water-feature integration: larger water features with full-perimeter lighting tied into the patio scheme — one continuous run from pool edge to patio surround.
Colour temperature for outdoor scale installs
2700K — deep amber for hospitality decks, restaurants, and feature gardens where warmth dominates.
3000K — soft warm white. The default for large residential decking and garden boundaries.
4000K — neutral white. Specified for modern composite-decking properties and contemporary garden architecture.
6000K — cool daylight. Commercial outdoor, security accent, premises where colour rendering accuracy beats mood.
Need a shorter run?
Decking LED Lights 24V — 1cm cut, 15m: precision cut for stair nosings and narrow boards.
Decking LED Lights 24V — 5cm cut, 20m: the standard mid-range option for typical decking under 20m.
Every order is custom-cut to your exact metre count, IP67-resealed at the end, and dispatched ready for the install team.
Specifications
- Voltage: 48V DC
- Power draw: 9W per metre
- LEDs per metre: 120 (2835 SMD, wired in series-of-two)
- Light output: up to 690 lumens per metre
- CRI: >80
- Beam angle: 120°
- Dimensions: 6mm wide × 12mm deep
- Cut interval: 10cm (100mm) — every 10 LEDs
- Minimum bend radius: 15mm, horizontal plane
- Continuous run: 40m single-feed (60m dual-end)
- Available colours: 2700K, 3000K, 4000K, 6000K
- Operating range: -30°C to +50°C
- LED rated life: 50,000 hours
- IP rating: IP67 (rated for permanent outdoor)
- Construction: UV-stable silicone
- Mounting: 6x12mm aluminium channel + clip
- Standards: UKCA, CE, RoHS
- Warranty: 4 years
4-year warranty. Free UK delivery on Mainland orders (2-3 working days). Designed in the UK.
Specifications
Specifications
| Brand | |
|---|---|
| Product Type | |
| Colour | Multiple — 2700K, 3000K, 4000K, 6000K |
| IP Rating | |
| LED's Per Metre | 120 |
| Continuous Run | 40m |
| Voltage | 48V |
| Watts Per Metre | 9 Watts |
| Metres | 50m |
| Dimensions | 6x12mm |
| Width | 6mm |
| Depth | 12mm |
| Bending Angle | |
| Lumens Per Metre | 690 lm |
| Cut Points | 10cm (100mm) |
| Operating Temperature | -30°C to 50°C |
| LED Type | 2835 |
| Average LED Life Hours | 50,000 |
| Continuous Operating Hours | 12 hours |
| Max Bending | 1.5cm |
| Shape | Flat |
| Certification | UKCA, CE, RoHS |
| Material | Silicone |
| Guarantee | 4 Years |
| Attachment | Clips & Profile |
| Beam Angle | 120 |
| CRI | >80 |
Shipping & Returns
Shipping & Returns
Shipping Policy
Free UK Delivery
We offer free standard UK delivery on over 95% of our products. Standard free-shipping parcels are sent via Royal Mail 48-hour tracked delivery.
Next Day Delivery
Next Day Delivery orders are sent via DPD, with full tracking details provided.
The exception — 1-metre rigid profiles
A small range of approximately 21 products — our 1-metre rigid aluminium and PVC profiles — carries a delivery charge. These items are too long for our standard free-shipping service: Royal Mail cannot accept a parcel longer than 45 cm, and a 1-metre profile far exceeds that limit.
Because of their length these profiles are shipped by DPD courier, not Evri. We moved this range to DPD after Evri’s parcel loss rate and damage rate on long items became unacceptably high — DPD gives these orders the protection and tracking they need to arrive intact.
For these 1-metre profiles, delivery is charged at checkout:
- £6.95 — 1 to 2 working days (DPD), on orders under £90
- FREE next-day delivery when your order total is £90 or more
- Timed and Saturday upgrades are available at checkout
All other orders continue to qualify for our standard free Royal Mail 48-hour delivery.
Order cut-off & delivery times
- Order cut-off is 1pm, Monday to Friday. Orders placed before 1pm dispatch the same working day; after 1pm, the next working day.
- Next Day Delivery means the next working day — it excludes weekends, bank and public holidays. An order before 1pm Friday is delivered Monday; after 1pm Friday it dispatches Monday for Tuesday delivery.
- For a Saturday arrival, select “Saturday Delivery” at checkout — standard Next Day Delivery does not deliver on Saturdays.
- We cannot dispatch on bank holidays; orders go out on the next working day.
- Large order? Please call 01952 370028 before ordering so we can confirm whether it can be dispatched same-day or next-day.
For full details see our Shipping Policy.
Return Policy
We offer a 15 day, no-quibble returns or replacement policy, because we want you to be totally satisfied with your purchase. If you’re unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 15 days of receiving it.
We will pay for your return postage on a faulty item as long as you send it using Hermes or Royal Mail 2nd class recorded delivery and within 15 days of receiving it.
All products available in variable lengths are cut and customized from 30-metre or 50-metre rolls according to your specific requirements. Only a limited number of items are pre-made. Since our made-to-measure items, such as LED Strip Lights, Silicone Profiles, Bendable Profiles or Neon Flex Lights, are customized specifically for you, they cannot be cancelled or returned. Please ensure your order details are correct before placing it, as these items are considered special orders and are non-refundable once processed. However, if you purchase a full 50-metre roll, you may return it for a full refund, provided it is unused, in its original condition, and in the original packaging. Certain items are excluded from our returns and refund policy, including goods that are made to measure, cut, or mixed according to your requirements. Orders with different cutting lengths, or any order over £50 in value, are classified as custom and therefore do not qualify for a refund or return if there is no fault with the product. These orders require significant time and effort to prepare. All the unused accessories such as power supplies, power adapters, controllers, drivers and profiles are returnable.
Any type of modification to the lights will invalidate the warranty. Once the lights have been modified no replacement or refunds will be issued, specially the AC 220V 240V led strip and neon flex lights which come with an attached UK Plug (Hardwiring 220V 240V lights will void the warranty).
If you want to hardwire the lights then please check the DC 12V, 24V and 48V which are designed to be hardwired using a power supply. If the item becomes faulty within the warranty period (12 Months) then we will issue you a replacement. Please note that we will only be able to send you a replacement, no refunds will be issued. We are not responsible for any fitting and fixture costs.
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
With our technical expertise and relentless attention to detail, we ensure our customers deliver their projects to the highest standards.
We handle everything—from sourcing and customization to manufacturing and delivery—so your products arrive job-ready and ready for immediate installation.
Share your project details with us, and our team will assess your requirements to recommend the most effective and tailored solutions for your needs.
Every light we create is custom-cut and tailored to your exact design specifications—delivering a truly bespoke lighting solution that fits your project perfectly.
Whether you're creating atmosphere, enhancing architecture, or elevating your brand, our precision-prepared lighting lets you enjoy the perfect ambience from the moment it's installed.