SP108E WiFi Controller DC 5V-24V for SK6812 SK6812-RGBW WS2812 WS2813 WS2811 AL2815 Digital Pixel Strip Light & Neon Flex

DPRGBC524V-WIFI
£28.95
£28.95
  • WiFi Remote Control: Long-distance IOS and Android App remote control via WiFi, IOS 10.0 or Android 4.4 or later edition required. Support routing connection mode (AP) and LAN connection mode (STA)

  • Rich Color Modes:180 kinds of multi-color dynamic modes, 8 kinds of single color modes such as a meteor, breathing, wave, catch-up, stack, flash, flow, static. Color, brightness, and speed are adjustable

  • Capture the image’s color you like: The WiFi controller features a creative from-image-to-effect function. It can capture the color of the image, create distinctive color effects and synchronize light color with the atmosphere of your room

  • User-friendly design: Support setting pixels number and segments number, control up to 2048 pixels in total. Save user setting when power off. DC 5V~24V wide working voltage; reverse connection protection; hot-swap protection

  • Wide Compatibility:Support almost LED IC, such as WS2811,WS2812B, WS2801, SK6812, SK6812-RGBW, WS2813,SK9822,APA102,WS2818, LPD6803, LPD8806, TM1913, UCS1903, SM16703, DMX512,etc. (DO NOT control 5050RGB or RGBW led strip which has no IC )

WHY NOT WORKING? It's very important to know the difference of the 2 modes AP Mode & STA Mode.

 

  • AP(Access Point) mode: controller and phone connect directly ,controller working as an access point.

 

Connect steps:1. When the device is not connected to any WIFI network, power on the controller and wait for 20s

and the controller will switch into AP mode;

2.In the WIFI setting page, find and connect the controller(named like SP108E_xxx,the default pin code is12345678);

3. Open the LED Shop App, then the controller will be shown on the device list.

  • STA(Station)mode: Controller and phone are in one same WIFI network,in this network. users can operate the controller smoothly

 

Connect steps:

1. When the device is not connected to any WIFI network, power on the controller, the controller will remain in Wait-For-Connect mode for 20 seconds;

2. Make sure that your phone is connected to the WIFI network, Open LED Shop APP, press the Add Device button, input the WIFI pin code, then press the OK to confirm and wait for the configure processing finish;

3. When the controller successfully enter the WIFI network, it will be shown on the device list;

4. User can select the controller and remove it from the network by pressing the Remove Device button, then the controller will switch into AP mode.

 

Product Specification:

Control Type RGB RF Controller
Voltage: 5V-24V DC
Dimension ‎10.5 x 5.4 x 2.4 cm; 61 Grams
Energy Class: A++
Detection Distance: 20 m
IP Rating IP40
Includes: Screw Driver
Colour Mode 300
Warranty: 2 Years
Working Temperature: -30°C ~ +60°C

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Mark J
Perfect 10 out of 10

Omar has been very helpful and the product so far build quality and ease of use and set up far exceeded my expectations. I had thin ip67 lrd tape in thin gel previously this did not last. If these stand the test of time. 2 years warranty then i will be over the moon, Have already recommended Atom to work colleagues and family.

Shipping Policy

We offer FREE economy 2-3 day delivery on all orders with no minimum order quantity. The Free Delivery is only in Mainland UK. All paid orders are shipped via one of our Next Working Day or 48hr delivery services. If ordered before 1 pm, Monday - Friday, your order will be despatched the same day unless otherwise stated*. Items are not despatched on weekends. We know getting your items delivered safely and on time is critical. That’s why we’ve selected the best delivery services available.

We offer Next Day Delivery via DPD. If you place your order before 1300 then your order will be delivered Next Day. We also offer Saturday Delivery as well.

International Shipping

We now ship worldwide from the UK. All international orders will be sent by a trackable method with DPD, Royal Mail and ParcelForce. We delivery to most countries in Europe, Asia, Middle East, North & South America. Please see the checkout page for an accurate quote for your country.

Return Policy

We offer a 15 day, no-quibble returns or replacement policy, because we want you to be totally satisfied with your purchase. If you're unhappy in any way with your purchase, you can return it for a refund or a replacement, as long as you return it in the same condition as it arrived (original/undamaged packaging and product) and within 15 days of receiving it.
We will pay for your return postage on a faulty item as long as you send it using Hermes or Royal Mail 2nd class recorded delivery and within 15 days of receiving it.

Have Questions?Ask An Expert
[time] ago, [location]
The cookie settings on this website are set to 'allow all cookies' to give you the very best experience. Please click Accept Cookies to continue to use the site.
SP108E WiFi Controller DC 5V-24V for SK6812 SK6812-RGBW WS2812 WS2813 WS2811 AL2815 Digital Pixel Strip Light & Neon Flex

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Mark J
Perfect 10 out of 10

Omar has been very helpful and the product so far build quality and ease of use and set up far exceeded my expectations. I had thin ip67 lrd tape in thin gel previously this did not last. If these stand the test of time. 2 years warranty then i will be over the moon, Have already recommended Atom to work colleagues and family.

You have successfully subscribed!
This email has been registered