MaxiFlex White 6x12mm IP67 24V 1cm cut 15m

MaxiFlex precision-cut for landscape and driveway detail. Where the 5cm and 10cm formats handle long perimeter runs, the 1cm cut format handles the fine work — driveway corner returns, planter detail lines, walkway markers, garden feature accents. Cut at any 10mm mark, fit around the architecture, light it.

15m of single-feed continuous run on 24V DC. 6x12mm IP67 silicone built for unprotected outdoor exposure. 120 LEDs per metre, 690 lumens per metre, CRI above 80. Same construction quality as the longer MaxiFlex formats — the difference is cut interval, optimised for installs where every centimetre lands somewhere specific.

Where 1cm cut MaxiFlex specifies in

Driveway returns and entrance markers: driveway edges typically curve at the entrance and meet pillar bases or gate posts. Cut at 1cm to follow each curve cleanly without forcing the silicone past its bend radius.

Garden feature lighting: raised planter walls under 1.5m, water feature surrounds, sculpture plinths, retaining wall capstones with frequent corners. The fine cut interval keeps every section purposeful.

Pathway accent strips: garden paths between 5m and 12m where the line passes through arches, around bay windows, beside steps. The 15m reel covers the typical residential pathway in one piece.

Architectural detail outdoor: soffit lines that change direction every 1-2m, fascia under garden rooms, exterior trim on outbuildings — anywhere the line is short and frequently broken.

MaxiFlex vs the Decking range — what's different

MaxiFlex and the Decking line share the same 6x12mm IP67 build and 24V electrical spec. The difference sits in positioning and the recommended use case. MaxiFlex is specified for driveways, landscape borders, commercial outdoor, and architectural detail — uses where the flex is visible against open hardscaping. The Decking line is specified for recessed installs into timber and composite boards. Both work in either context — the naming reflects how installers most often pick them.

Driver and install detail

Driver sizing: 15m × 9W = 135W. Use a 165W minimum (× 1.2 safety) — 200W 24V driver for headroom. Smaller drivers run hot and shorten LED life.

Cut precision: 10mm cut marks define safe break points. Cut at the mark only — between marks shorts the segment. We can pre-cut and reseal end-caps before dispatch.

Bend radius: 1.5cm horizontal minimum. Tighter and the LED chips fracture inside the silicone. Vertical bending is not supported on this profile — the flex is horizontal-bend only.

Profile compatibility: our 6x12mm aluminium landscape profiles work for outdoor use — they protect the silicone from UV and mechanical impact, dissipate heat, and create a clean recessed finish flush with the hardscape.

Compliance: install per BS7671 by a qualified electrician. Use an isolated low-voltage DC driver — never bypass to mains.

For UK garden feature and patio accent lighting

Where the lighting is more decorative than functional — focal points, accents, and detail surrounds. The 1cm cut interval sits perfectly with intricate residential garden features:

Specimen tree and feature plant uplights: fine wash around mature trees, topiary, and structural shrubs at the edge of patios and lawns. Cut to follow the trunk circumference exactly.

Water feature borders: ornamental ponds, fountains, rills, and bubbler stones — anywhere the lighting needs to follow a curved or geometric water edge under 15m.

Garden sculpture and feature plinths: light around the base of statues, pedestals, focal-point urns, and contemporary garden art. The 6x12mm profile recesses into capstone grooves cleanly.

Pergola underside detail: intricate pergola undersides where the structure has cross-beams, rafters, or trellis detail. The 1cm cut handles every joint.

Colour temperature for outdoor detail work

2700K — warm amber. Hospitality outdoor, garden bars, atmosphere-led residential entrances.

3000K — soft warm. Universal residential outdoor — pairs with brick, timber, sandstone.

4000K — neutral white. Modern composite hardscaping, contemporary entrances, grey paving.

6000K — cool daylight. Security accent, commercial entrances, where visibility wins over mood.

Other MaxiFlex formats

MaxiFlex Extra Long 24V — 5cm cut, 20m: the standard mid-range MaxiFlex for typical driveway and garden perimeter projects up to 20m.

MaxiFlex Extra Long 48V — 10cm cut, 40m: trade-grade long-run for commercial and large-residential installs past 20m.

Custom-cut to your specified length, end-cap IP67-resealed at our facility, dispatched UK-wide.

Specifications

• Voltage: 24V DC
• Power: 9 watts per metre
• LED count: 120 per metre (2835 SMD)
• Lumens: ~690 per metre
• CRI: >80
• Beam angle: 120°
• Profile: 6mm × 12mm
• Cut points: every 10mm (1cm)
• Bend radius: 15mm minimum, horizontal only
• Continuous run: 15m single-feed, 30m dual-end
• Colour temperatures: 2700K, 3000K, 4000K, 6000K
• Operating temperature: -30°C to +50°C
• LED life: 50,000 hours
• IP rating: IP67
• Body: UV-stable silicone
• Mounting: aluminium landscape profile + clip
• Certifications: UKCA, CE, RoHS
• Warranty: 4 years

4-year warranty. Free UK delivery on Mainland orders (2-3 working days). Designed in the UK.