The thinnest furniture and joinery LED neon flex, with the widest choice of custom lengths in the industry.
Our furniture and joinery LED neon flex starts at 4.5mm wide — thin enough to seat inside a 6mm shadow gap that no standard profile will fit. Four sections, four colour temperatures, and every run cut to the exact metre you need.
Send your cutting list. We cut each run to length, fit the tail and seal the end, so your fitter connects a finished piece instead of cutting on site. The silicone drops straight into a routed groove — no aluminium channel, no diffuser, no visible dots.
Thin matters because the groove is cut before anything is ordered. At 4.5 × 4.5mm our smallest section clears a 6mm groove, so a joiner can detail a shadow gap without widening it to suit a fitting. The 4 × 8mm seats in a groove 4.2mm wide by 8.5mm deep.
Custom length matters because joinery is never a round number. Instead of a fixed reel and an offcut, you get the exact metre run, terminated with a 150mm tail and sealed at the end — which keeps the IP65 rating intact and the guarantee valid. Cutting on site does neither.
The range
Four sections. Every colour and length in one listing.
Each listing carries all colour temperatures and every metre length, so you pick the section once and choose the rest on the product page.
FAQs
Made-to-order questions.
Do you cut to custom lengths?
Yes. Send your cutting list and we cut each run to the exact metre length, fit the tail and seal the end before dispatch.
Can I cut it myself on site?
Cutting on site breaks the IP65 seal and voids the guarantee. Send measurements and we prepare the run instead.
Which section fits a 6mm shadow gap?
Only the 4.5 × 4.5mm. Every other section needs 8mm or more.
Do I need an aluminium profile?
No. Rout the groove to the section plus 0.2–0.5mm clearance and the silicone friction-fits on its own.
How long does a bespoke order take?
Cut-to-measure runs add one working day. Order before 2pm and standard lengths dispatch the same working day from Telford.
Next step
Send your cutting list for a bespoke quote.
Elevations or a list of lengths is enough. We confirm the section, size the drivers and quote the cut runs.