Warm White Neon Flex 2700K 24V 10x10mm Dual Bend IP67 Waterproof 12m

Our 10x10mm Dual Bend LED Neon Flex bends in two planes — horizontal and vertical — for curved architectural details, cove lighting, wraparound features, and complex layouts where single-bend flex cannot follow the line. 24V DC, 144 LEDs per metre, IP67, cut every 4.17cm (41.7mm) for precise custom lengths with minimal waste.

Built from anti-yellowing UV-stable silicone, it holds up to UK weather year-round — rain, frost, and direct sun — and is safe for indoor or outdoor installation. Pre-soldered tails ship ready to wire, and a 120° beam angle delivers smooth, shadow-free light with no visible hot spots.

Where this neon flex fits best

• Curved architectural runs: dual-bend flexibility follows outside curves, inside corners, and wraparound details that flat single-bend flex cannot reach.
• Architectural features: coving, stair nosings, fascia lines, ceiling detail, and retail feature frames.
• Outdoor installs: pergolas, pathways, soffits, and facade lighting — IP67 handles rain, dew, and temperature swings.
• Retail and hospitality: bar fronts, back-of-house coves, restaurant feature walls, and brand displays.

Install notes

• Driver sizing: total wattage × 1.2 safety margin. A 10m run at 11W/m draws 110W, so use a 150W 24V driver.
• Bend radius: 3cm (30mm) minimum in either plane. Tighter curves risk cracking the LEDs inside the silicone body.
• Cut points: cut only at the marked 4.17cm (41.7mm) intervals — cutting between marks damages the circuit. If you cut the flex yourself, we cannot guarantee the IP67 rating unless the cut end is resealed by ATOM LED.
• Profile recommended: our neon flex aluminium profiles improve heat dissipation, protect the silicone, and give a clean finish on straight runs.
• Standard: should be installed by a competent person in accordance with BS7671.

Choose a different colour temperature

• 3000K warm white — soft warm white, the most popular all-purpose residential and retail tone.
• 4000K natural white — neutral balanced white, ideal for kitchens, workshops, and retail feature runs.
• 6000K cool white — crisp daylight, ideal for task lighting, commercial, and facade work.

Need a different bend?

• 10x10mm Top Bend (Vertical Bend) 48V 2700K warm white neon flex: bends in the vertical plane only — up to 25m single feed or 50m dual feed on 48V, for arches, stair nosings, and long fascia runs.

Every order is custom cut to your exact length — no off-the-shelf sizes, no waste. Tell us the length you need and we will cut, seal, and ship it ready for installation.

Specifications

• Voltage: 24V DC
• Max power: 11W per metre
• LED density: 144 LEDs per metre
• Lumens: up to 495 lm per metre
• CRI: >85 (colour-accurate rendering)
• Beam angle: 120°
• Dimensions: 10mm × 10mm
• Cut points: every 4.17cm (41.7mm) — do not cut between marked points
• Minimum bend radius: 3cm (30mm), horizontal and vertical
• Continuous run: up to 12m from one side
• Colour temperature: 2700K warm white
• IP rating: IP67 — rated for indoor and outdoor use
• Material: anti-yellowing UV-stable silicone
• Certification: CE, RoHS, UKCA, ETL
• Warranty: 4 years

4-year warranty. Free UK delivery on all Mainland UK orders (2-3 working days). Designed in the UK.

The lights are custom cut as per your specific requirements.